Makes a change to do some metalwork again.
I got the lids for the stern lockers back form the press works so it was now a case of making up a rim to make the lids self draining but NOT into the lockers. I only stitch welded the frame as I didn't want to distort things too much as the lids are a snug fit.
Gas Locker
With Lid
Port locker
With Lid
The white line is sealer and is in place of full welding.
I have also started rubbing down the primer ready for another coat to bring in the areas I have damaged by welding then it will be on to undercoat and top coat for this area.
Posts
No comments:
Post a Comment